The price of deformed seams varies according to different models, seam widths, materials and other factors.
1. Model: The wall deformation joint can be divided into three types: exterior wall, interior wall and ceiling. Usually, the exterior wall is equipped with a water stop as standard. The interior wall and ceiling are based on design requirements. Usually, the interior wall and ceiling are equipped with resistance Fire belt, under normal circumstances, the model, the width of the seam, the same material, the price of the outer wall is higher than the inner wall and ceiling deformation joints. According to the national standard atlas of building deformation joints, the types of wall deformation joints are mainly divided into three types: metal cover type, metal latch type, and rubber inlay type; ground deformation joint types can be divided into metal cover type and metal latch type. There are six types of double-row embedded flat type, load-bearing type and seismic type; under the condition of the same width and material, the price of earthquake-resistant type and load-bearing type is generally higher than that of the metal cover type. Usually, the ground deformation joints are also equipped with resistance Fire belts; roof deformation joints can be divided into two types: metal cover type and seismic type. Generally, the roof must be equipped with a water stop. In the case of the same width and material, the price is similar. Therefore, the location, model, seam width, and material of different buildings also have different prices.
2. Seam width: Expansion joints affect the width of the complete surface of the deformation seam. The width of the complete surface is thus the width of the cover of the deformation seam. When the width of the cover plate increases, the thickness of the cover plate also increases, and the cost increases. The width is directly proportional to the price of the deformed seam material.
3. Material: The deformation joints of the building can be related to the selected materials, mainly metal cover type, metal cover type wall, floor, and roof deformation joint materials can be selected from aluminum alloy plate and stainless steel plate. The prices are different, so these all affect the price of deformation joints on walls, floors and roofs.
4. Others: Due to the development and demand of society, the prices of aluminum and stainless steel materials often change in the building materials market. Therefore, the prices of materials for deformation joints also change, and the factory will make corresponding adjustments based on changes in market prices. In fact, according to the customer's real-time requirements of the model, seam width, material, etc., after accounting, the real-time price is reported to the customer.
5. The price of deformation joints in our factory is generally about 30 yuan / meter-380 yuan / meter
Mobile: 13862814940 Email: firstname.lastname@example.org Address: No. 118, Outer Ring East Road, Nantong (Nanya Plastic Industrial Park)